LAB Detector
|
Related Documents |
Features
- D*(10.6 µm) up to 6·106 cm·√Hz/W
Description
The set includes a cylindrical package integrating an IR detector and preamplifier. The detecting head is connected with a cable to the power supply. The power supply with a user selectable 110/230 VAC mains is a separate unit. The detecting head is equipped with a mounting (M8x1), thread and a mounting post as an option.
Technical specification
|
Model: LAB Detector DC 10 |
Specifications |
Units |
|
Detector Type |
PVM-10.6 |
|
|
Spectral Range |
2 - 12 |
µm |
|
Response Time |
≤1 |
nsec. |
|
Detectivity at λp at 10.6 µm |
≥3·106 |
cmHz1/2/W |
|
Responsivity |
≥0.03 |
V/W |
|
Area |
1x1 |
mm2 |
|
Field of View |
90 |
90 |
|
Sheet Resistivity |
10 - 150 |
Ω |
|
Preamplifier |
VPDC-10 Integrated with Detector |
|
|
Bandwidth |
0-10 |
MHz |
|
Output Signal (at the BNC Connector) |
0 to 2 |
V |
|
Transimpedance |
10000 |
V/A |
|
Input Noise Amplifier |
1 |
nV/sqrt Hz |
|
Biasing of the Head through a CANON Connector, 9 Pins, Female |
Biasing Unit Connected to the Detecting Head with a Coard.110/230 VAC User Selectable Mains |
V |
|
Dimensions of Detecting Head |
D=56, LTOTAL=108 |
mm |
|
Mass of Detecting Head |
210 |
g |
|
Dimensions of Biasing Unit |
177x150x52 |
mm |
|
Mounting |
Mounting Post.Dia.=13.7 , L=108 |
mm |
|
Power Supply |
PPS-02-12 |
|
|
Supply Voltage |
±12 |
V |
|
Supply Current |
±40 |
mA |
Caution
- CW OPTICAL POWER MUST NOT EXCEED 30 W/cm2
- PULSES SHORTER THAN 1 µs MUST NOT EXCEED 1 MW/cm2